Prodigy Autocode El manual del propietario descargar pdf (Pagina 25)

PRODIGY

Owner’s Manual PRODIGY

Owner’s Manual

Prodigy Diabetes Care, LLC www.prodigymeter.com

Prodigy Diabetes Care, LLC 1.800.243.2636

The Prodigy Pocket

stores the 120 most recent blood glucose test

results with date and time in its memory. It also provides you with 7, 14

and 28–day averages of your blood glucose test results. You can review

the individual or average test results by entering the memory mode.

STEP 1: Enter the Memory Mode

While the meter is turned off, press the “M” button twice.

The 7-day average will appear, indicating that you are in the memory

mode. If you continue to press the “M” button, the 14 and 28–day

averages will appear in order.

You can then review the last

120 individual test results in the

memory. When using the meter

forthersttime,“- - -” appears,

showing that there are no test

results in the memory.

See Figure 55.

STEP 2: Recalling Average

Test Results

The 7–day average is calculated

from the blood glucose results

obtained during the last 7 days.

It also indicates how many blood

glucose tests have been performed

within this period, e.g., 21 (21 tests

in the last 7 days). See Figure 56.

Using the Meter Memory

Figure 55

Figure 56

The 14–day average is calculated

from the blood glucose results

obtained during the last 14 days.

See Figure 57.

It, too, indicates how many blood

glucose tests have been performed, e.g., 41 (41 tests in the last 14

days). The 28–day average shows the same information.

STEP 3: Recalling Individual Test Results

After the 28–day average, the most recent test result with date and

time will be shown. Press the “M” button once and the next most

recent test result will appear.

Each time you press and release the

“M” button, the meter will recall up

to your last 120 test results in order.

When the memory is full, the oldest

result is dropped as the newest is

added. After reaching the last set of

results, the meter will display the

7–day average again. See Figures

57 and 59.

STEP 4: Exit the Memory Mode

Press and hold the “M” button for

three (3) seconds to turn off the meter.

Important: If you do not press any button for one (1) minute,

the meter will show “OFF” and turn off automatically.

Figure 58

Figure 59

Figure 57

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 44 45

Comentarios a estos manuales

Sin comentarios

Prodigy Autocode El manual del propietario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Prodigy Autocode