Prodigy Autocode El manual del propietario descargar pdf (Pagina 23)

PRODIGY

AutoCode® Blood Glucose Meter PRODIGY

AutoCode® Blood Glucose Meter

Owner’s Manual Owner’s Manual

44

Figure 31

Figure 32

45

Figure 33

Figure 34

Applying Blood to the Test Strip

STEP 1: Insert the Test Strip

Insert a test strip with the contact bar

end entering into the test strip slot rst.

Push the test strip as far as it will go

without bending it. The meter turns on

automatically. See Figure 31.

Voice Speaks: “Your Prodigy®

meter is on. Please wait. Please

apply blood into the test strip.”

STEP 2: Apply Blood Sample

When the meter shows the “ ”, apply

blood to the opening of the absorbent

channel of the test strip where it meets

the narrow channel. Blood will be

drawn into the test strip. See Figure 32.

If the test strip conrmation window is

full, you will hear a beep. See Figure 33.

Voice Speaks: “Testing.”

If the conrmation window is not full,

“L-b” is displayed. You will have to use a

new test strip.

If you have trouble lling the test strip,

please contact Customer Care at

1.800.243.2636 for assistance.

Caution: DO NOT:

• Smear or scrape the blood onto the test strip.

• Apply blood to the test strip when the test

strip is not in the meter.

• Put blood or foreign objects into

the test strip slot.

STEP 3: Read Your Result

After the meter counts down from

6 to 1, your blood glucose test

result appears along with the unit of

measure, date and time.

See Figure 34.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 75 76

Comentarios a estos manuales

Sin comentarios