Prodigy Autocode El manual del propietario descargar pdf (Pagina 9)

PRODIGY

Owner’s Manual

Prodigy Diabetes Care, LLC www.prodigymeter.com

STEP 10: Select Unit of Measurement

Press and release the “M” button until the unit

of measurement you are choosing appears on

the display. Press the “SET” button and the

memorysegmentwillstartashing.

See Figures 26 and 27.

Your meter can display test results in milligrams per

deciliter (mg/dL) or millimoles per liter (mmoL/L).

• The mg/dL unit is standard in the United

States.

• The mmol/L unit is standard in Canada.

STEP 11: Delete Memory

When the “dEL”symbolandtheashing“ ”

symbol appear on the display, you can choose to

clear the memory. If you do not want to clear the

memory, press the “SET” button again to skip

this step.

If you want to clear ALL memory, press the “M”

button for (4) four seconds and both “dEL” and

“ ”willash.Pressthe“M” button again

to delete ALL memory. The “- - -” will appear to

indicate all memory has been deleted and the

meter will turn off. See Figure 28.

Setup is now complete. Press the “SET” button.

“OFF” is displayed and the meter turns off.

See Figure 29.

Figure 28

Figure 29

Figure 26

Figure 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Sin comentarios

Prodigy Autocode El manual del propietario Pagina 9